Keyword Index

A

  • Active methods Comprehensive study of particle separation in microfluidic devices [37.3, Issue 1, 2021, Pages 91-110]
  • Aircraft conceptual design Application of Axiomatic Design approach to reduce coupling and repetition in the UCAV conceptual design process [37.3, Issue 2, 2021, Pages 69-79]
  • Axiomatic Design Application of Axiomatic Design approach to reduce coupling and repetition in the UCAV conceptual design process [37.3, Issue 2, 2021, Pages 69-79]

B

  • Biomechanical models Evaluation and management of workers’ musculoskeletal injury risks during handling/installation of the driver car seat in Iran-Khodro industrial group [37.3, Issue 2, 2021, Pages 29-35]

C

  • Chemico-osmosis A review of research approaches to contaminant transport in saturated deformable clay under coupled hydro-chemico-mechanical processes [37.3, Issue 2, 2021, Pages 97-115]
  • Cold Mass Fraction Numerical investigation of transient temperature separation phenomenon in vortex tube [37.3, Issue 1, 2021, Pages 3-15]
  • Combustion models Numerical investigation of the premixed V-flame stabilization and blowout [37.3, Issue 2, 2021, Pages 57-67]
  • Compound Channel Exploring impacts of inlet condition on flow structure in a Compound open-channel using PIV [37.3, Issue 2, 2021, Pages 37-46]
  • Computational Fluid dynamics Numerical investigation of transient temperature separation phenomenon in vortex tube [37.3, Issue 1, 2021, Pages 3-15]
  • Contaminants transport A review of research approaches to contaminant transport in saturated deformable clay under coupled hydro-chemico-mechanical processes [37.3, Issue 2, 2021, Pages 97-115]
  • Converging-Diverging Nozzle Sensitivity Analysis of the Dominant Design Parameters of Supersonic Separators for Gas Compositions [37.3, Issue 1, 2021, Pages 111-123]
  • Coupled flow A review of research approaches to contaminant transport in saturated deformable clay under coupled hydro-chemico-mechanical processes [37.3, Issue 2, 2021, Pages 97-115]
  • Coupling Application of Axiomatic Design approach to reduce coupling and repetition in the UCAV conceptual design process [37.3, Issue 2, 2021, Pages 69-79]
  • Cyclone Separator Sensitivity Analysis of the Dominant Design Parameters of Supersonic Separators for Gas Compositions [37.3, Issue 1, 2021, Pages 111-123]

D

  • Dynamical System Reduced Order Model of Conduction Heat Transfer in a Solid Plate Based on Dynamic Mode Decomposition [37.3, Issue 2, 2021, Pages 3-12]
  • Dynamic Modes Decomposition Reduced Order Model of Conduction Heat Transfer in a Solid Plate Based on Dynamic Mode Decomposition [37.3, Issue 2, 2021, Pages 3-12]

E

  • Energy Harvesters Investigating the efficiency of piezoelectric wind energy harvesting in leaf-stalk structures [37.3, Issue 2, 2021, Pages 81-95]
  • Entrance effect Exploring impacts of inlet condition on flow structure in a Compound open-channel using PIV [37.3, Issue 2, 2021, Pages 37-46]
  • Experimental methods Comprehensive study of particle separation in microfluidic devices [37.3, Issue 1, 2021, Pages 91-110]

F

  • Flow Pattern Exploring impacts of inlet condition on flow structure in a Compound open-channel using PIV [37.3, Issue 2, 2021, Pages 37-46]
  • Fluid-Structure Interaction Investigating the efficiency of piezoelectric wind energy harvesting in leaf-stalk structures [37.3, Issue 2, 2021, Pages 81-95]
  • Force Method Minimum weight design of truss structure via force method and Jaya algorithm” [37.3, Issue 1, 2021, Pages 27-36]

H

  • Hydraulic engine mount Multi-objective optimization of hydraulic engine mounts vibrational behavior by non-dominated sorting genetic algorithm [37.3, Issue 1, 2021, Pages 49-58]

I

  • Injection Pressure Experimental Investigation of the Effect of Pilot Fuel Injection Pressure and Start of Injection on Combustion and Emission of RCCI Engine fueled with Diesel-CNG [37.3, Issue 1, 2021, Pages 37-48]
  • Internal pressure Stress intensity factor for a small radial crack located on external edge of a rotating viscoelastic cylinder subjected to internal pressure and temperature distribution [37.3, Issue 1, 2021, Pages 17-26]
  • Iran-Khodro Evaluation and management of workers’ musculoskeletal injury risks during handling/installation of the driver car seat in Iran-Khodro industrial group [37.3, Issue 2, 2021, Pages 29-35]

J

  • Jaya algorithm Minimum weight design of truss structure via force method and Jaya algorithm” [37.3, Issue 1, 2021, Pages 27-36]

L

  • Landfill A review of research approaches to contaminant transport in saturated deformable clay under coupled hydro-chemico-mechanical processes [37.3, Issue 2, 2021, Pages 97-115]
  • Leaf-Stalk Investigating the efficiency of piezoelectric wind energy harvesting in leaf-stalk structures [37.3, Issue 2, 2021, Pages 81-95]
  • Low back pain Evaluation and management of workers’ musculoskeletal injury risks during handling/installation of the driver car seat in Iran-Khodro industrial group [37.3, Issue 2, 2021, Pages 29-35]

M

  • Mass transfer Exploring impacts of inlet condition on flow structure in a Compound open-channel using PIV [37.3, Issue 2, 2021, Pages 37-46]
  • Membrane efficiency A review of research approaches to contaminant transport in saturated deformable clay under coupled hydro-chemico-mechanical processes [37.3, Issue 2, 2021, Pages 97-115]
  • Metaheuristic Minimum weight design of truss structure via force method and Jaya algorithm” [37.3, Issue 1, 2021, Pages 27-36]
  • Methane Sensitivity Analysis of the Dominant Design Parameters of Supersonic Separators for Gas Compositions [37.3, Issue 1, 2021, Pages 111-123]
  • Multi-Injection Experimental Investigation of the Effect of Pilot Fuel Injection Pressure and Start of Injection on Combustion and Emission of RCCI Engine fueled with Diesel-CNG [37.3, Issue 1, 2021, Pages 37-48]

N

  • Neural network Recognizing Acceptance Level in Facial Expressions by Neural Network [37.3, Issue 2, 2021, Pages 13-20]
  • Numerical simulations Comprehensive study of particle separation in microfluidic devices [37.3, Issue 1, 2021, Pages 91-110]

P

  • Particle Image Velocimetry Exploring impacts of inlet condition on flow structure in a Compound open-channel using PIV [37.3, Issue 2, 2021, Pages 37-46]
  • Particle separation Comprehensive study of particle separation in microfluidic devices [37.3, Issue 1, 2021, Pages 91-110]
  • Passive methods Comprehensive study of particle separation in microfluidic devices [37.3, Issue 1, 2021, Pages 91-110]
  • Piezoelectric Materials Investigating the efficiency of piezoelectric wind energy harvesting in leaf-stalk structures [37.3, Issue 2, 2021, Pages 81-95]
  • Pollution Experimental Investigation of the Effect of Pilot Fuel Injection Pressure and Start of Injection on Combustion and Emission of RCCI Engine fueled with Diesel-CNG [37.3, Issue 1, 2021, Pages 37-48]
  • Power Coefficient Study the effect of suction flow control on the aerodynamic performance of a wind turbine using 2D section numerical Results [37.3, Issue 1, 2021, Pages 79-89]
  • Premixed combustion Numerical investigation of the premixed V-flame stabilization and blowout [37.3, Issue 2, 2021, Pages 57-67]

R

  • Random search Minimum weight design of truss structure via force method and Jaya algorithm” [37.3, Issue 1, 2021, Pages 27-36]
  • Reactivity Control Compression Ignition Experimental Investigation of the Effect of Pilot Fuel Injection Pressure and Start of Injection on Combustion and Emission of RCCI Engine fueled with Diesel-CNG [37.3, Issue 1, 2021, Pages 37-48]
  • Reduced Order Model Reduced Order Model of Conduction Heat Transfer in a Solid Plate Based on Dynamic Mode Decomposition [37.3, Issue 2, 2021, Pages 3-12]

S

  • Schmidt Factor Investigation of Texture Intensity Effect on Deformation Behavior of Extruded Mg-0.8wt%Y Alloy under Tensile and Compressive Loading Using the Crystalline Plasticity Finite Element Method [37.3, Issue 1, 2021, Pages 59-69]
  • Simulation Simulation of a Double Slope Solar Still with Rotating External Reflector [37.3, Issue 2, 2021, Pages 21-28]
  • Single phase ejector Numerical modeling and geometric optimization of single-phase supersonic ejector [37.3, Issue 1, 2021, Pages 71-78]
  • Slip systems Investigation of Texture Intensity Effect on Deformation Behavior of Extruded Mg-0.8wt%Y Alloy under Tensile and Compressive Loading Using the Crystalline Plasticity Finite Element Method [37.3, Issue 1, 2021, Pages 59-69]
  • Stress intensity factor Stress intensity factor for a small radial crack located on external edge of a rotating viscoelastic cylinder subjected to internal pressure and temperature distribution [37.3, Issue 1, 2021, Pages 17-26]
  • Suction Actuator, Wind Turbine Study the effect of suction flow control on the aerodynamic performance of a wind turbine using 2D section numerical Results [37.3, Issue 1, 2021, Pages 79-89]

T

  • Temperature Separation Numerical investigation of transient temperature separation phenomenon in vortex tube [37.3, Issue 1, 2021, Pages 3-15]
  • Thermal Diffusion Reduced Order Model of Conduction Heat Transfer in a Solid Plate Based on Dynamic Mode Decomposition [37.3, Issue 2, 2021, Pages 3-12]
  • Thermal distribution Stress intensity factor for a small radial crack located on external edge of a rotating viscoelastic cylinder subjected to internal pressure and temperature distribution [37.3, Issue 1, 2021, Pages 17-26]
  • Thermal efficiency Experimental Investigation of the Effect of Pilot Fuel Injection Pressure and Start of Injection on Combustion and Emission of RCCI Engine fueled with Diesel-CNG [37.3, Issue 1, 2021, Pages 37-48]
  • Transient Solution Numerical investigation of transient temperature separation phenomenon in vortex tube [37.3, Issue 1, 2021, Pages 3-15]
  • Turbulence models Numerical investigation of the premixed V-flame stabilization and blowout [37.3, Issue 2, 2021, Pages 57-67]

V

  • V-flame Numerical investigation of the premixed V-flame stabilization and blowout [37.3, Issue 2, 2021, Pages 57-67]
  • Vortex Tube Numerical investigation of transient temperature separation phenomenon in vortex tube [37.3, Issue 1, 2021, Pages 3-15]

W

  • Wind energy Investigating the efficiency of piezoelectric wind energy harvesting in leaf-stalk structures [37.3, Issue 2, 2021, Pages 81-95]

Z

  • Zener model Stress intensity factor for a small radial crack located on external edge of a rotating viscoelastic cylinder subjected to internal pressure and temperature distribution [37.3, Issue 1, 2021, Pages 17-26]